Scorpion Exo-510 Air Radium Matt Black-Pink Helmet


Model SCO EXO-51-215-179
Price:
S$360.00

Available Options


* Size:
M S L

Qty: - +
   - OR -   

 

Features

3 outer shell sizes

AIRFIT CONCEPT

Airfit™ permits a rider to personalize helmet fit through airadjustable cheek pads with additional noise reduction.Only by SCORPION EXO!

Pinlock® MAXVISION

Fitting perfectly into the specially depressed area of thefaceshield, the Pinlock® creates continuous air pressure throughthe compression force, which in turn stops condensation - and thusfogging - from occurring even when the temperature differencebetween the outside and the inside of the helmet increases.

NEW ELLIP-TEC® FACESHIELD SYSTEM

Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism furtherimproves the ease and speed of faceshield changes so unique toScorpion. This operation can be done tool-less within 10 seconds,with the shield open. Wind tunnel designed to minimize wind noiseat high speed, fitted with even more powerful springs to ensureoptimum fit of the shield against the seal through the compressionforce, fully sealed and quieter, ELLIP TEC is also stronger to keep the shieldin place in the event of a fall.

KWIKWICK2®

LINER:Very effective, hypoallergenic,removable, machine washable, and very soft and pleasant to thetouch, the KwikWick2® lining of the new ScorpionExo® 2011 range isa real custom-made slipper for your head.

More Features

  • Advanced Polycarbonate Composite Engineered Shell: Quiet,aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additionalprotection.
  • Ventilation system: Adjustable, indexed front and rear ventswith aero-tuned rear spoiler reduce lift, create vacuum andmaximize airflow through helmet.
  • Breath-deflector: Enhanced fog-free performance.
  • Chin-cover: contributes to noise reduction.
  • Micrometric Automatic chinstrap buckle for quick release andprecise adjustment.

How to choose the good size ?

The first step in the fitting process is to measure around your head at the temple above the eye brow.

The next step in the fitment process are fitment checks. The following tests should be performed with the chin strap properly and securely in place. Helmet movement should also move the skin on your face and scalp. Helmets will fit snug when new and have abreak in period. The helmet should not fit so tight as to caused is comfort or pain. If your measurement is at the upper number of any size range start at that range then move up as needed.

1. With the helmet in place and chin strap secured, shake your head side to side, if the helmet moves independently of your head then the helmet is too big. When performing this test, the helmet liner and cheek pads should be in direct contact with your skin. While shaking, your skin should move with the helmet.

2. Place one hand directly behind your head and push forward. Use your other hand and try to slip your little finger between your forehead and the helmet EPS liner. If you are able to slip your finger in, the helmet is too big.

3. To test for helmet lift, place one hand on the chin bar and push up (while the chin strap is secured), if the helmet comes off your head it is too big. Next, place one hand on the back and pushup again, if your helmet lifts off your head the helmet is too big.

Product Care

Cleaning the Outside of the Helmet

Never use any solvents or abrasive cleaners to clean your helmet!! For optimum performance, rinse your helmet in warm water using a mild soap. If the outside is dirty with dried dirt and bugs, we suggest you place a wet towel over the helmet for at least one minute before wiping it clean. This softens the foreign objects before removal lessening the chance of scratches. The multiple coatings on the face shield are resistant to light scratching, however, heavy, abusive scratching can break through the coatings and cause visible marks. Removing dirt and bugs with good cleaning practices and keeping your helmet in a RaceCase™ will significantly help to prolong the life of your helmet and face shields.

Cleaning the Inside of the Helmet

The removable, washable liner in all our helmets make it easy to clean. Even a man can do it. Remove the cheek pads first by unsnapping the 3 (usually) button snaps on each one. Be careful not to "tear" the pad out, but carefully un-snap each button. The"crownliner" can be unsnapped (2) from the back of the head area and the pulled away from the helmet in the forehead area. Note the alignment arrows for re-installing the crownliner. Throw these three pieces into the washing machine if possible in a washing bag so that the plastic parts cannot be broken or damage the textile and allow to air dry before re-installing.

Cleaning the Face Shield

The Scorpion Exo face shields for 400s and 700s have different cleaning procedures for inside and outside. The outside is coated with an anti-scratch coating which prevents minor scratches, but cannot resist heavy wiping and cleaning without preliminary softening of the dirt, grime and bugs first. Note the damp towel method of softening dried bugs and dirt above. Plastic polishes work fine to clean the outside of the shield as long as the dirt and grime has been softened and removed first. The inner Everclear™no-fog coated face shields require special treatment for cleaning. We suggest using a warm water and mild soap combination followed by"pat drying" with a dry towel. "Wiping" may cause premature wear and scratching on the Everclear™ inner coating.

Chemicals

Certain common household chemicals will react negatively with the polycarbonates, fiberglass or coatings of your helmet. Avoid contact with acetone (nail polish remover), caustic solutions(ammonia-based cleaners), hair sprays containing methyene, chlorine from swimming pools or glues.

Size Metric
XXS 51-52cm
XS 53-54cm
S 55-56cm
M 57-58cm
L 59-60cm
XL 61-62cm
XXL-XXXL 63-64cm / 64-65cm