HJC CS 15 Toni Elias 24 MC4H Full Face Motorcycle Helmet - PSB Approved
In compliance with LTA (Land Transport Authority) and the standards of PSB certification
HJC CS-15 Toni Elias 24 MC4H Full Face Motorcycle Helmet - PSB Approved
All new helmets are sold with Clear visor . Smoke visor on picture are for illustration purposes only
The CS-15 is a competitively priced full-face helmet for riders that value quality and safety. The Advanced Polycarbonate Composite Shell provides a lightweight helmet, with superior fit and comfort using advanced CAD technology. The Optically-superior face shield provides 95% UV protection. The “ACS” Advanced Channeling Ventilation system allows full front to back airflow to flush heat and humidity up and out.
VISOR / SUN SHIELD OPTIONS
- HJ-09 STANDARD VISOR
- HJ-09 RST-MIRRORED VISOR
- HJ-09 FLAT VISOR W/ TEAR-OFF POSTS
- HJ-09 PINLOCK® READY VISOR
- HJ-09 RST MIRRORED PINLOCK® READY VISOR
- TOP / LOWER / REAR VENT
- GEAR PLATE
- BREATH DEFLECTOR
- CHIN CURTAIN
- CHEEK PADS
Meets or exceeds ECE 22.05 approved. Testing includes energy attenuation, penetration resistance, chin strap structural integrity and labeling requirements for on-road motorcycle helmets
The Advanced Polycarbonate Shell is designed to be lightweight with a superior fit and comfort, using CAD technology. .
- All HJC shields offer 95% UV-A & B protection
- Pinlock® ready shield
BIOCERAMIC NYLEX INTERIOR
Moisture-wicking interior with advanced anti-bacterial fabric.
Glasses grooves: Accommodates riders who wear eyeglasses and sunglasses.
ACS - ADVANCED CHANNELING VENTILATION SYSTEM
HJC's helmets, along with our technology, have added experience in designing the MotoGP race helmets to have the best technology in aerodynamics and ventilation and related fields. HJC's helmets provide the airiest helmets on the market. Experience the best performance with your HJC helmet.
The warranty is applicable to manufacturers defects for ups to 3 years from the date or purchase or 5 years from the date of manufacturing. (whichever comes first).
Only use approved methods to clean the helmet. Using other unapproved chemicals or methods may damage the helmet shell or lining. A damaged helmet may increase your risk of serious injury or death in an accident.
Glossy Finish: HJC recommends cleaning your helmet with products designed for automotive cleaning and polishing. All HJC helmets are finished with an automotive type base coat/clear coat finish. Rubbing compounds can be used for deep cleaning to remove many scratches and scuffs. Follow the product’s instructions diligently. Over polishing with rubbing compounds can cause light abrasions which may dull the finish of your helmet. Stickers and decals will leave adhesive residue when removed. To remove the adhesive residue, use alcohol swabs. Be certain to immediately wipe away the excess liquid and clean the area with soap and water once the adhesive residue is removed. Do not use excessive pressure while rubbing when attempting to remove the adhesive residue, instead use multiple light treatments.
Non-Glossy Finish: For our flat finish (non-glossy) helmets, we recommend using warm water and mild soap. Use multiple treatments for heavier dirt. Do not use excessive pressure or rubbing compounds while cleaning the surface as a “glossy” effect could be created, ruining the flat finish appearance.
Although we recommend changing a helmet every 3 to 5 years, the accumulation of sweat, humidity, and dirt can deteriorate the fabric and stitching and this may cause odor. To wash HJC removable pads, HJC recommends regular machine washing and air drying.
For non-removable interiors, HJC recommends using bacteria and mildew eliminating products such as “Helmet Fresh”.
Dirt and debris can find its way into the venting of your HJC helmet. Compressed air cans used for cleaning computer keyboards may be used to blow the debris from the ventilation system. It is recommended that you remove any removable pads before doing this process.
Use of replacement parts not manufactured by HJC may increase your risk of serious injury or death in an accident. Only use HJC parts that are specifically designed to work with this helmet.
DO NOT MODIFY YOUR HELMET
Your HJC helmet is designed to meet SNELL and DOT standards. Contact HJC America for more information about SNELL and DOT standards. Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC helmet. Modifications include the following:
cutting shell, liner, or strap;
modifying the retention system, including adding a chin cup;
painting and attaching accessories that are not manufactured by HJC for this helmet.
If you have any questions about modifications, please email us at email@example.com.
STORING YOUR HELMET CORRECTLY
An improperly stored helmet can become damaged and may increase your risk of serious injury or death in an accident. You should:
Store helmet in a cool and dry place,
Keep helmet away from pets and other animals,
Keep helmet away from the heat in excess of 50ºC and do not set on or near hot surfaces.