Engines

Moto Corse MC 102110023 Titanium Alternator CoverFeaturess:The alternator cover is made of titanium and constructed through the use of CNC machines.This special piece is perfectly interchangeable with..

Moto Corse MC 102110026 Aluminium Alternator Cover Features: The alternator cover is made of aluminium alloy (Anticorodal) and constructed through the use of CNC machines This special piece..

Yoshimura 258-567-0030 T D C StopperTHIS PART(S) IS PRODUCED FOR RACE USE ONLY. ANY OTHER USE VIOLATES THE LAW...

Yoshimura 702-404-4100 YD-MJN24 Carburetor Body Set..

Yoshimura 704-201-0024 Manifold Kit YD-MJN24 Multi-UseYD MJN28Set (Inc. Gasket etc.) : Part No. 704-201-0028Manifold Only: Part No.: 704-201-1028YD-MJN24Set (Inc. Gasket etc.) : Part No. 704-201-0024M..

Yoshimura 731-010-1000 Main Jet N100 604 Suitable for Yoshimura Mikuni MJ N100-604 # 100 ..

Neccessary Parts: THROTTLE SET (for TM-MJN22/24/26) One of following required: Yoshimura Aluminium Air Funnel for TM-MJN22/24/26 Dual Stack Air Funnel System (for TM-MJN24/26) Air Filter ..

Required Part: GROM Carburetor Conversion Kit Recomended Part: Dual Stack Funnel System for YD-MJN28 Aluminum Air Funnnel Set Universal Oil Catch Tank Set Large Adjust Screw Drain Bo..

Recommended Parts:ST-1M CamshaftUniversal Oil Catch tank SetPRO-GRESS1 (Thermo & Volt meter)PRO-GRESS Meter sensor Type-G　M12×1.5BAZZAZ QS4 USBSUNSTAR Drive Sprocket16T (Parts No.SUN-103-16)Required P..

Type: ST-R MAX LIFT(mm): IN 9.00mm/EX 9.30mm 1mm DURATION(Degrees): IN 236-Degrees/EX 242-Degrees Standard Tappet clearance(mm): IN 0.15mm/EX 0.25mm [Included Parts] Cut-out Adjustable Camsha..

  Type: ST-R Type-SB1 MAX LIFT(mm): IN 10.6/EX 8.8 1mm DURATION(Degrees): IN 259.0/EX 250.0 Standard Tappet Clearance(mm): IN 0.13/EX 0.15 [Included Parts] Adjustable Camshaft Sprocket Va..

Type: ST-R TYPE-R MAX LIFT(mm): IN 10.00mm/EX 8.60mm 1mm DURATION(Degrees): IN 256-Degrees/EX 252-Degrees Standard Tappet Clearance(mm): IN 0.20mm/EX 0.25mm [Included Parts] Adjustable Camshaft..

Type: ST-1 (Stage 1 Camshaft) MAX LIFT(mm): IN 9.00mm/EX 7.80mm 1mm DURATION(Degrees): IN 244-Degree/EX 230-Degrees Standard Tappet Clearance(mm): IN 0.20mm/EX 0.20mm [Included Parts] Camshaf..

Type: ST-1 MAX LIFT(mm): IN 9.50mm/EX 8.70mm 1mm DURATION(Degrees): IN 249-Degree/EX 235-Degree Standard Tappet Clearance(mm): IN 0.20mm/EX 0.20mm [Included Parts] Cam Sprocket [Special Re..

..