Scorpion Exo-R1 Air Fabio Quartararo Monster Rep Full Face Motorcycle Helmet - PSB Approved
-
S$800.00
In compliance with LTA (Land Transport Authority) and the standards of PSB certification
All new helmets are sold with Clear visor . Smoke visor on picture are for illustration purposes only
Scorpion EXO-R1 Air Fabio Monster Rep Full Face Motorcycle Helmet - PSB Approved
- Multi-layered Ultra-TCT® shell combines fiberglass, aramid and poly-resin fibers which minimize weight while maximizing strength and impact dispersal
- Aero-tuned shell sculpture helps reduce aerodynamic drag, improve balance, and maximize mobility
- Advanced multi-layer EPS provides superior energy absorption and channels for increased airflow
- Aero-Tuned ventilation features a Ram-Air intake system, 4 port exhaust spoiler system and EPS channels for an optimal flow-thru effect
- Optically superior Clear 2D MaxVision® Pinlock-Ready® face shield installed. Anti-scratch coated and offers 95% UV-A & UV-B protection
- FREE Additional Dark Smoke 2D MaxVision® Pinlock-Ready® face shield and Pinlock® Anti-fog insert included
- EllipTec™ II quick-release face shield mechanism with integrated center lock provides a superior shield-to-gasket seal
- Removable/washable KwikWick® III interior keeps you cool, dry and comfortable
- AirFit® inflation adjustment system provides a custom fit to your cheek pads, also reducing wind noise and lift
- 3D contoured, Kwikfit® cheek pads allow easy access for most eye glasses
- EMT-friendly,emergency release cheek pads
- Integrated speaker pockets to accommodate BlueTooth® communication system speakers
- Breath Deflector included for enhanced fog-free performance
- Aero Skirt (Chin Curtain) included to help reduce wind noise
- Titanium Double D-Rings
- DOT FMVSS No. 218 Certified / ECE Approved
- 5 Year Warranty
Optional ‘Thinner’ Cheek Pads sold separately
SHELL CLEANING
Only use approved methods to clean the helmet. Using other unapproved chemicals or methods may damage the helmet shell or lining. A damaged helmet may increase your risk of serious injury or death in an accident.
Glossy Finish: HJC recommends cleaning your helmet with products designed for automotive cleaning and polishing. All HJC helmets are finished with an automotive type base coat/clear coat finish. Rubbing compounds can be used for deep cleaning to remove many scratches and scuffs. Follow the product’s instructions diligently. Over polishing with rubbing compounds can cause light abrasions which may dull the finish of your helmet. Stickers and decals will leave adhesive residue when removed. To remove the adhesive residue, use alcohol swabs. Be certain to immediately wipe away the excess liquid and clean the area with soap and water once the adhesive residue is removed. Do not use excessive pressure while rubbing when attempting to remove the adhesive residue, instead use multiple light treatments.
Non-Glossy Finish: For our flat finish (non-glossy) helmets, we recommend using warm water and mild soap. Use multiple treatments for heavier dirt. Do not use excessive pressure or rubbing compounds while cleaning the surface as a “glossy” effect could be created, ruining the flat finish appearance.
INTERIOR CLEANING
Although we recommend changing a helmet every 3 to 5 years, the accumulation of sweat, humidity, and dirt can deteriorate the fabric and stitching and this may cause odor. To wash HJC removable pads, HJC recommends regular machine washing and air drying.
For non-removable interiors, HJC recommends using bacteria and mildew eliminating products such as “Helmet Fresh”.
VENT CLEANING
Dirt and debris can find its way into the venting of your HJC helmet. Compressed air cans used for cleaning computer keyboards may be used to blow the debris from the ventilation system. It is recommended that you remove any removable pads before doing this process.
REPLACEMENT PARTS
Use of replacement parts not manufactured by HJC may increase your risk of serious injury or death in an accident. Only use HJC parts that are specifically designed to work with this helmet.
DO NOT MODIFY YOUR HELMET
Your HJC helmet is designed to meet SNELL and DOT standards. Contact HJC America for more information about SNELL and DOT standards. Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC helmet. Modifications include the following:
drilling holes;
cutting shell, liner, or strap;
modifying the retention system, including adding a chin cup;
removing parts;
painting and attaching accessories that are not manufactured by HJC for this helmet.
If you have any questions about modifications, please email us at info@hjchelmets.com.
STORING YOUR HELMET CORRECTLY
An improperly stored helmet can become damaged and may increase your risk of serious injury or death in an accident. You should:
Store helmet in a cool and dry place,
Keep helmet away from pets and other animals,
Keep helmet away from the heat in excess of 50ºC and do not set on or near hot surfaces.
