HJC I30 Open Face Motorcycle Helmet - PSB Approved
-
S$180.00
or 3 installments of S$60.00 with
In compliance with LTA (Land Transport Authority) and the standards of PSB certification
HJC I30 Open Face Motorcycle Helmet - PSB Approved
All new helmets are sold with Clear visor . Smoke visor on picture are for illustration purposes only
The i30 was created from years of design and research, bringing the best open face helmet to the market. It starts with the next generation face shield. This new Pinlock ready shield offers a wide distortion-free view and now has a reinforced frame around the lower edges to reduce wind turbulence. The shield also uses the tool-less, quick-release base plate system for easy to use install/removal. We also updated the internal sun shield with an increased coverage area than our previous model. The 3 top vent intake system provides maximum airflow into the helmet, while the rear exhaust spoiler creates a vacuum effect flushing out the heat. The Multi-Cool top liner and cheek pad interior gives additional cooling features with its moisture-wicking anti-bacterial fabric. The 2 Shell/3 EPS breakdown reduces the weight of the helmet and offers better sizing. The i30 is also Smart HJC ready to accept the 10B or 20B Bluetooth systems (*sold separately). Overall, this new Open Face helmet will be the choice of riders for years to come.
SPECIFICATIONS
Sizing
Size | Cheek | Pads | Liner |
---|---|---|---|
XS | 53-54 cm | 30mm | 12mm |
S | 55-56 cm | 25mm | 9mm |
M | 57-58 cm | 35mm | 12mm |
L | 59-60 cm | 30mm | 9mm |
XL | 61-62 cm | 30mm | 9mm |
2XL | 63-64 cm | 20mm | 7mm |
VISOR / SUN SHIELD OPTIONS
- HJ-34 ANTI-FOG LENS PIN PREPARED VISOR
- HJ-V9 SUN SHIELD
REPLACEMENT PARTS
- TOP VENT
- SUN SHIELD
- CHEEK PADS
- HEADLINER
Technical Features
SMART HJC
SMART HJC 20B and 10B Bluetooth communication system co-developed with SENA tailored specially for HJC helmets. SMART HJC can be installed on HJC's various models and due to the compact size and aerodynamic design of the Bluetooth unit, it enhances the overall look and aerodynamic design of the shell. *All SMART HJC devices sold separately.
STANDARD ECE
Meets or exceeds ECE 22.05 approved. Testing includes energy attenuation, penetration resistance, chin strap structural integrity and labeling requirements for on-road motorcycle helmets
POLYCARBONATE SHELL
The Advanced Polycarbonate Shell is designed to be lightweight with a superior fit and comfort, using CAD technology.
VISOR: HJ-34
- All HJC shields offer 99% UV-A & B protection
- Anti Fog Lens prepared.
SUN SHIELD: HJ-V9
Integrated Sun Visor: Improved peripheral vision and excellent sunlight blocking help to reduce eye strain. Anti-Fog and Anti-Scratch coated.
MULTICOOL INTERIOR
Advanced anti-bacterial fabric provides enhanced moisture-wicking and quick-drying function.
Removable Interior.
Glasses grooves can accommodate riders who wear glasses.
SUPERIOR VENTILATION
9 intakes, 4 exhaust ventilation channels to keep head cool and comfortable.
3YEAR WARRANTY
The warranty is applicable to manufacturers defects for ups to 3 years from the date or purchase or 5 years from the date of manufacturing. (whichever comes first)
SHELL CLEANING
Only use approved methods to clean the helmet. Using other unapproved chemicals or methods may damage the helmet shell or lining. A damaged helmet may increase your risk of serious injury or death in an accident.
Glossy Finish: HJC recommends cleaning your helmet with products designed for automotive cleaning and polishing. All HJC helmets are finished with an automotive type base coat/clear coat finish. Rubbing compounds can be used for deep cleaning to remove many scratches and scuffs. Follow the product’s instructions diligently. Over polishing with rubbing compounds can cause light abrasions which may dull the finish of your helmet. Stickers and decals will leave adhesive residue when removed. To remove the adhesive residue, use alcohol swabs. Be certain to immediately wipe away the excess liquid and clean the area with soap and water once the adhesive residue is removed. Do not use excessive pressure while rubbing when attempting to remove the adhesive residue, instead use multiple light treatments.
Non-Glossy Finish: For our flat finish (non-glossy) helmets, we recommend using warm water and mild soap. Use multiple treatments for heavier dirt. Do not use excessive pressure or rubbing compounds while cleaning the surface as a “glossy” effect could be created, ruining the flat finish appearance.
INTERIOR CLEANING
Although we recommend changing a helmet every 3 to 5 years, the accumulation of sweat, humidity, and dirt can deteriorate the fabric and stitching and this may cause odor. To wash HJC removable pads, HJC recommends regular machine washing and air drying.
For non-removable interiors, HJC recommends using bacteria and mildew eliminating products such as “Helmet Fresh”.
VENT CLEANING
Dirt and debris can find its way into the venting of your HJC helmet. Compressed air cans used for cleaning computer keyboards may be used to blow the debris from the ventilation system. It is recommended that you remove any removable pads before doing this process.
REPLACEMENT PARTS
Use of replacement parts not manufactured by HJC may increase your risk of serious injury or death in an accident. Only use HJC parts that are specifically designed to work with this helmet.
DO NOT MODIFY YOUR HELMET
Your HJC helmet is designed to meet SNELL and DOT standards. Contact HJC America for more information about SNELL and DOT standards. Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC helmet. Modifications include the following:
drilling holes;
cutting shell, liner, or strap;
modifying the retention system, including adding a chin cup;
removing parts;
painting and attaching accessories that are not manufactured by HJC for this helmet.
If you have any questions about modifications, please email us at info@hjchelmets.com.
STORING YOUR HELMET CORRECTLY
An improperly stored helmet can become damaged and may increase your risk of serious injury or death in an accident. You should:
Store helmet in a cool and dry place,
Keep helmet away from pets and other animals,
Keep helmet away from the heat in excess of 50ºC and do not set on or near hot surfaces.