Stomp 35 10001 Adhesion Promoter Kit-3m Primer Sticks

Stomp 35-10001 Adhesion Promoter Kit - 3m Primer Sticks

3M Primer 94 Ampules can be used to promote adhesion of 3M tapes to surfaces such as polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal, and painted metal surfaces.

We highly recommend using the primer sticks to treat vehicle surfaces to promote the strongest possible bond between it and Stompgrip, especially along the edges.

This is important when applying the Traction Pads to challenging surfaces like plastic side panels and/or areas that see heavy abuse from riding boots.

This adhesion promoter kit can be applied to all vehicles.

Specification (3M^™ Tape Primer 94)

3M^™ Tape Primer 94 can be used to promote adhesion of 3M tapes to surfaces such polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Physical Properties:

• Solids: Approximately 6%
• Color: Clear light yellow - clear dark orange
• Flashpoint: -4°F (-20°C) O.C.
• Coverage: 600 sq. ft. (14.7 sq. m/l) per gallon
• Net Weight: 820 grams per liter
• Viscosity: Typical range is 1-10 cps (35 cps maximum)

Shelf Life:

18 months from date of manufacture when stored in the original container at 60-80°F (15-27°C).

• Keep 3M^™ Tape Primer 94 in the original container.
• Transfer only a small amount into a work vessel for use.
• Keep original container tightly sealed to avoid solvent evaporation